High Nickel Alloys

Our nickel alloy products widely used in engineering, oil and gas, pharma, chemicals industry etc.

we offer a wide range of inconel products that includes inconel pipes, inconel tubes, inconel flanges, inconel fittings, inconel butt weld fittings and inconel forged fittings. Some of the range includes 15 NB UP TO 600 NB IN SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 etc.

We offer and deal in wide range of Monel 400/K500 in form of Pipes, Tubes,Butt Weld Fittings, Forged Fittings, Flanges, Sheets, Plates, Coils, Bars, Fasteners etc.

We offer wide range of hastelloy products as per the following specifications:-

Alloy 20 is an austenitic nickel-iron-chromium alloy with additions of copper and molybdenum.

The nickel content makes Alloy 20 resistant to chloride-ion stress-corrosion cracking. Copper and molybdenum give resistance to reducing environments. The molybdenum content also provides good resistance to pitting and crevice corrosion. The chromium gives resistance to oxidizing environments such as nitric acid. The addition of niobium reduces the effect of carbide precipitation during welding, thus increasing the alloy's resistance to intergranular corrosion.

we offer alloy 20 products as per the following specifications:-

904L is a high-alloy austenitic stainless steel with low carbon content. The grade is intended for use under severe corrosive conditions. It has been application proved over many years and was originally developed to resist corrosion in dilute sulfuric acid. It is standardized and approved for pressure vessel use in several countries. Structurally, 904L is fully austenitic and is less sensitive to precipitation ferrite and sigma phases than conventional austenitic grades with high molybdenum content. Characteristically, due to the combination of relatively high contents of chromium, nickel, molybdenum and copper 904L has good resistance to general corrosion, particularly in sulfuric and phosphoric conditions.

we offer alloy 904L products as per the following specifications:-

We offer an extensive range of premium quality titanium products to our clients. We take utmost care that these products are in strict compliance with industry specific standards. Optimization of different grades of titanium, mainly of grade 1 and grade 2 imparts to them high durability. Being a customer oriented organization, we pay careful attention towards the all logistic requirements of our clients right from placing the orders to their delivery.

Grades - Titanium (Grade I & II)